Select Page

Wire Partitions/Tool Crib Security

Custom

Custom-WirecraftersCustom wire wall partition systems are made to fit. They ensure your facility will receive the size and configuration you need for corner, 3-sided, or fully enclosed installations.Wire partitions are ideal for all warehouses, construction sites, retail, pharmaceutical cages, tenant storage, and much more.Contact us for your idea of layout and we will design or assist your layout. We will also install your wire cages wherever placed in your facility.

 

 

DEA Approved Enclosures

DEA-WirecraftersWhen properly installed, WireCrafters Style 840 Partitions meet the U.S. Drug Enforcement Administration’s requirements for physical security of Schedule III through V controlled substances as outlined in Title 21 CFR Sections1301:72-1301.76 physical security controls.

Style 840 features include:

  • Self-closing, self-locking doors
  • 10 gauge wire wall and ceiling panels
  • 2” square steel support posts
  • Welded base plates
  • Posts are set no more than 10 feet apart
  • Walls have minimum 1-1/2″ horizontal reinforcement at least every 60”
  • Standard mesh has a 2″ x 1″ rectangular opening
  • Panels mount flush to floor
  • Heavy 3/8″ hardware non-accessible from the exterior
  • Panels stack to any height
  • Clear spanned ceilings up to 35 feet across.

Drug Industry’s Special Needs:

As stipulated by 21 CFR 1301.72 storage areas for Schedule III through V controlled substances require an intense and high-level of security. WireCrafters comply with DEA above and beyond. Here are the stipulations of a “Drug Cage”

Doors must be self-closing and self-locking.WireCrafters offers a number of standard and custom lock options to meet this requirement, as well a line of self-closing doors with mechanical and powered operators.

Walls are constructed of not less than Number 10 steel fabric with openings not more than 2-1/2″ across the square, mounted on steel posts, set no more than 10’-0” apart, with horizontal reinforcement.

WireCrafters standard panels are a maximum 10’-0” long, 4’-0” or 5’-0” high, and are made of 2″ x 1″ opening 10 gauge steel wire. The frames of our panels satisfy the requirement for horizontal reinforcement every 60”.Walls shall be mounted to posts at least 1” in diameter and lagged to the floor.Standard posts are 2″ square with base plates for floor anchoring welded to each.

Lag bolts need to be pinned or brazed once installed.A ceiling of same materials, or erected to reach the structural ceiling of the building, WireCrafters system uses the same panels in walls and ceilings.

Furthermore, our system is so strong that panels can be stacked between posts to reach most any building ceiling.Panels mount flush to the floor.A simple modification to the whole layout on our stock posts eliminates the sweep space allowing flush to floor mounting of the panels as required for this application.

Guarding & Safety

Robot Machine Guard-WirecraftersWireCrafters is known throughout the robotics and material handling industries as the high-quality supplier of perimeter guards for robotic work cells, machine guards, physical barriers, pallet rack back, and lift enclosures.

 

 

 

 

 

Locker Storage

WireCrafters-tenant-storage-lockerResidential

Tenant Wire Lockers: WireCrafters all steel woven wire storage lockers are an ideal way to secure residents’ items in multi-family building common storage areas. The lockers add efficiency and organization to cluttered or unused storage space. The contents of the lockers are transparents (liability reasons) but secure design allows existing lighting, ventilation, and fire suppression systems to function effectively throughout the secured areas.

Tenant Solid: WireCrafters solid steel storage lockers are an ideal way to secure residents’ personal items in multi-family building common storage areas. The lockers add efficiency and organization to cluttered or unused storage space. Furthermore the locker’s solid fronts and walls provide an element of privacy for residents’ secured items. The controlled-access offers more security and also allows building owners access for liability reasons.

Industrial Bulk Storage

Wire: WireCrafters bulk storage lockers are a good solution for securing employee items or company equipment. Stored items are secured but remain visible for liability reasons. The open but secure design allows in-plant lighting, ventilation, and fire suppression systems to work effectively throughout the secured area.

Solid: WireCrafters solid steel storage lockers are an ideal way to secure employee items or plant equipment. Larger than a movable cabinet, more compact than a full enclosure, these lockers make an economical storage facility anywhere in your plant.

TA-50 Gear Locker

WireCrafters has designed and built Gear Storage Lockers for the demanding requirements of the military and other governmental agencies. Officers prefer WireCrafters Lockers because of their modern look, innovative design, heavy duty materials, and quality construction. WireCrafters’ lockers are quick to install and rock solid once in place. Available under GSA Contract.

Garage Locker

When storage space is at a premium, consider transforming the open space above parked cars into a convenient storage area. WireCrafters garage lockers turn this previously overlooked space into useful storage areas. Lockable doors on each end of the unit give easy access to stored items.

Mezzarails

MezzaRailWireCrafters combined the strength of square handrail with the versatility of wire partition to create the MezzaRail® 420 Rail System.This innovative handrail product provides more protection than 3, 4, or even 5-rail designs.Not only does MezzaRail® provide you with a sturdy handrail, but the mesh component of each section acts as a barrier to prevent items from passing through to the ground below.

Objects that easily pass through multi-rail systems are restrained by MezzaRail® protecting people and property from serious injury.The system can be mounted to the face side or deck of any mezzanine. Hinge gates and lift out gates are available for access to the protected area.

Features include:

  • Works as handrail and barrier
  • Mesh section contains items on mezzanine level
  • Mesh under rail prevents items from passing through
  • Easy to install panels go up fast
  • Kick plate integrated into panel system
  • Hinged, double hinged and lift out gates available
  • Price competitive with multi-rail systems

Partition Systems

WireCrafters-large-scale-wire-partition-enclosureWireCrafters Style 840 Partitions can be used to build freestanding secured storage areas, tool cribs, security enclosures, or to divide large buildings into smaller sections.The system sets up fast with standard hand tools, secure once in place, and easy to reconfigure.The open design allows free circulation of a building’s lighting, HVAC, and fire suppression systems throughout secured areas.You can construct walls and ceilings from the same modular sized panels.You can also stack panels to the desired wall height and bolt to posts using standard hand tools.A full line of hinged, double hinged, and sliding doors are available.

 

Physical Barriers

WireCrafters-Machine-Guards-Protecting-Automated-Robotic-Welder-with-Light-CurtainWire partitions from WireCrafters are a simple and effective way to protect personnel from the dangers posed by automated, mechanical, or hazardous equipment and areas.These barriers are generally used to segregate danger zones.System versatility allows easy integration of access doors or material handling openings with system controls.This guard is always on duty and unaffected by power outages or electrical problems. Also doubles as a potential safety net by containing objects ejected by a malfunctioning robot.Crimped and woven wire mesh is resilient to dings while retaining it’s shape, appearing new for a long time.

Protective Railings


WireCrafters-Double-Guard-Rail-System-Protecting-EquipmentMezzaRail
®

Handrails for Mezzanines: WireCrafters combined the strength of square handrail with the versatility of wire partition to create the MezzaRail® 420 Rail System. This innovative handrail product provides more protection than 3, 4, or even 5 rail designs. The mesh component of each section acts as a barrier to prevent items from passing through to the ground below.

Handrail: System 22

WireCrafters System 22: Handrail is an industrial handrail that is easy to install. This square steel railing system sets up with standard hand tools. That means no welding, cutting, or self tapping screws; it’s simply a “bolt up” system. System 22 Handrail makes an excellent aisle-way rail, machine guardrail, mezzanine rail, or robot guard.

GuardRail

Common Plant Guard Railing:Install WireCrafters Guard Rail in your plant to protect people, machinery, and property from unexpected accidents involving forklifts, sweepers, or other moving equipment. This protective railing system helps prevent damage to equipment or facilities by providing a strong barrier along aisle ways or in front of critical equipment. Guard rails are very common because they are necessary for employee and visitor guidance by segregating walkways and areas within the active facility.

Storage

WireCrafters-Secure-Storage-EnclosureWireCrafters Style 840 Partitions can be used to build freestanding secured storage areas, tool cribs, security enclosures, or divide large buildings into smaller sections.System set up is quick using standard hand tools to secure in one place, but also easy to reconfigure as work configuration changes.

The open design allows free circulation of a building’s lighting, HVAC, and fire suppression systems throughout Style 840 areas.Inquire about tops, sweep bottoms, windows, doors, and added security features.WireCrafters 840 Partition System is the most common of all secured tool storage in plants, construction zones, and maintenance cribs.

 

 

Vertical Lift Enclosures

WireCrafters-Vertical-Rise-DoorSafe operation of vertical conveying systems requires an enclosure that protects employees from moving parts as well as spilled loads.WireCrafters Style 840 Partition System’s open mesh design prevents access to hazardous areas without blocking the operator’s view.

Style 840 is strong enough to contain most load spills, protecting the operator and other personnel.It also protects people from the lift’s moving parts.Design your enclosure using standard modular parts.Control access to the lift with any of our hinged, sliding, tunnel, or vertical rise gates.Any gate may be outfitted with electric interlocks to shut down the system when opened.Gates may be outfitted with standard locks as well.